Meraki MR36H-HW Wi-Fi 6 Cloud Managed AP

  • Integrated three-port gigabit switch with POE passthrough
  • Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
  • Integrated Bluetooth® Low Energy radio
  • Two MU-MIMO 802.11ax Wi-Fi 6 radios
  • Up to 1.7 Gbps aggregate dual-band frame rate, 802.3af PoE compatible

Giá bán: Liên hệ báo giá

Tư vấn đặt hàng Để lại thông tin tư vấn

Meraki MR36H-HW Wi-Fi 6 Cloud Managed AP

  • Integrated three-port gigabit switch with POE passthrough
  • Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
  • Integrated Bluetooth® Low Energy radio
  • Two MU-MIMO 802.11ax Wi-Fi 6 radios
  • Up to 1.7 Gbps aggregate dual-band frame rate, 802.3af PoE compatible

Meraki MR36H-HW Datasheet

Specifications: 

Category Specifications
Radios 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply)
Supported frequency bands (country-specific restrictions apply):
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725 -5.825 GHz (UNII-3)
Antenna Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities  DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
2 x 2 multiple input, multiple output (MIMO) with two spatial streams
SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregation
Power Power over Ethernet: 37 – 57 V (802.3at compatible)
Power consumption: 30W max (802.3at).  Note: actual power consumption may vary depending on the AP usage.
Power over Ethernet injector sold separately
Note: Actual power consumption may vary depending on the AP usage.
Interfaces 1x 10/100/1000 BASE-T Ethernet (RJ45) (Uplink on the back)
1x 10/100/1000 BASE-T Ethernet (RJ45) with 802.3af Power over Ethernet output
2x 10/100/1000 BASE-T Ethernet (RJ45) outputs
1x Passthrough port (non-managed).
Mounting All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head)
Kensington lock hard point
Environment Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
Operating altitude: Up to 40,000 feet (12,192 meters)
Reliability Mean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperature
Physical Dimensions 15.5 cm x 11 cm x 2.3 cm (6.1″ x 4.33″x 0.9″) not including desk mount feet or mount plate
Weight: 17.35 oz (492 g)
Security Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)**
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
Mobility PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming
Analytics Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators 1 power/booting/firmware upgrade status
Regulatory RoHS
For additional country-specific regulatory information, please contact Meraki sales
Warranty Lifetime hardware warranty with advanced replacement included
Ordering Information MR36H-HW: Meraki MR36H Cloud Managed 802.11ax AP
MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
Note: Meraki access point license required.

 

 

3 đánh giá cho Meraki MR36H-HW

  1. Ryan (xác minh chủ tài khoản)

    Good quality.

  2. Avery (xác minh chủ tài khoản)

    Good quality.

  3. Nguyễn Hạnh

    Cho xin giá sản phẩm

Thêm đánh giá

SẢN PHẨM KHUYẾN MÃI