Hotline: 0911658758
Meraki MR57-HW Wi-Fi 6E Indoor AP
- Four 4:4 MU-MIMO 802.11ax, up to 8.35 Gbps tri-radio aggregate frame rate
- Dual 5 Gbps multigigabit Ethernet ports
- PoE: 802.3at and 802.3bt compliant
- Support for USB port
- 2.4 GHz, 5 GHz, and 6GHz radios, along with Air Marshal and IoT radio
- Full-time Wi-Fi location tracking
Specifications:
| Category | Specifications |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio |
| 5 GHz 802.11a/n/ac/ax client access radio | |
| 6 GHz 802.11ax client access radio | |
| 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio | |
| 2.4 GHz Bluetooth Low Energy radio with beacon and scanning support concurrent operation of all five radios | |
| Supported frequency bands (country-specific restrictions apply): | |
| Dual 5 GHz mode: | |
| 2.412-2.484 GHz ISM | |
| (5 GHz radio1) 5.150-5.250 GHz (UNII-1) | |
| (5 GHz radio1) 5.250-5.350 GHZ (UNII-2) | |
| (5 GHz radio2)5.470-5.600, 5.660-5.725 GHz (UNII-2e) | |
| (5 GHz radio2) 5.725 -5.825 GHz (UNII-3) | |
| Tri-band mode: | |
| 2.412-2.484 GHz ISM | |
| 5.150-5.250 GHz (UNII-1) | |
| 5.250-5.350 GHZ (UNII-2) | |
| 5.470-5.600, 5.660-5.725 GHz (UNII-2e) | |
| 5.725 -5.825 GHz (UNII-3) | |
| 5.850 to 5.895 GHz (UNII-4) | |
| 5.925 to 6.425 GHz (UNII-5) | |
| 6.425 to 6.525 GHz (UNII-6) | |
| 6.525 to 6.875 GHz (UNII-7) | |
| 6.875 to 7.125 GHz (UNII-8) | |
| Antenna | Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz, and 5.5 dBi gain at 6GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n capabilities | DL-OFDMA, TWT support, BSS coloring* |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 6 GHz | |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 5 GHz | |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz | |
| SU-MIMO, UL and DL MU-MIMO support | |
| Maximal ratio combining (MRC) & beamforming | |
| 20 and 40 MHz channels (802.11n); 20, 40, 80 MHz channels (802.11ac Wave 2); 20, 40, 80 and 160 MHz channels (802.11ax) | |
| Up to 1024-QAM on all three – 2.4 GHz, 5 GHz, and 6 GHz bands | |
| Packet aggregation | |
| Power | Power over Ethernet: 42.5 – 57V (PoE+ and 802.3bt compliant) |
| Alternative 54V DC input via DC adapter | |
| Power consumption: 30W to 40W (802.3bt) | |
| Minimum power requirement: 30W (PoE+, USB is disabled) | |
| Maximum power consumption: 40W | |
| Power over Ethernet injector and DC adapter sold separately. | |
| Note: Actual power consumption may vary depending on the AP usage. | |
| Interfaces | Two 1000/2.5G/5G BASE-T Ethernet (RJ45) |
| One DC power connector (5.5 mm x 2.5 mm, center positive) | |
| Mounting | All standard mounting hardware included (AIR-AP-BRACKET-2) |
| Desktop, ceiling, and wall mount capable | |
| Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes | |
| Physical Security | Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head) |
| Kensington lock | |
| Concealed mount plate with anti-tamper cable bay | |
| Environment | Operating temperature: 32 °F – 104 °F (0 °C – 40 °C) |
| Humidity: 5% to 95% non-condensing | |
| Reliability | Mean time between failure (MTBF): 998,440 hrs at +25° C operating temperature |
| Physical Dimensions | 260 mm x 260 mm x 56 mm, including desk-mount feet or mount plate |
| Weight: 1.7 kg | |
| Security | Integrated layer 7 firewall with mobile device policy management |
| Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal | |
| Flexible guest access with device isolation | |
| VLAN tagging (802.1q) and tunneling with IPsec VPN | |
| PCI compliance reporting | |
| WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal*, WPA3 – Enterprise*, WPA3 – Enhanced Open (OWE)* | |
| EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM | |
| TKIP and AES encryption | |
| Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration | |
| Cisco ISE integration for guest access and BYOD posturing | |
| Quality of Service | Advanced power save (U-APSD) |
| WMM access categories with DSCP and 802.1p support | |
| Layer 7 application traffic identification and shaping | |
| Mobility | PMK, OKC, and 802.11r for fast layer 2 roaming |
| Distributed or centralized layer 3 roaming | |
| Analytics | Embedded location analytics reporting and device tracking |
| Global layer 7 traffic analytics reporting per network, per device, and per application | |
| LED Indicators | One power/booting/firmware upgrade status |
| Regulatory | RoHS |
| For additional country-specific regulatory information, please contact Meraki sales | |
| Warranty | Lifetime hardware warranty with advanced replacement included |
| Ordering Information | MR57-HW: Meraki MR57 cloud-managed 802.11a-compatible AP |
| MA-PWR-50WAC: Meraki AC adapter for MR series | |
| MA-INJ-6: Meraki MultiGigabit 802.3bt power over Ethernet injector | |
John (xác minh chủ tài khoản) –
Very well worth the money.
Hayden (xác minh chủ tài khoản) –
Very fast delivery.
Nguyễn Lê Tuấn Hùng –
Hàng chính hãng giá lại rẻ
Nguyễn Hạ –
Cho xin giá sản phẩm
Trần Huỳnh Kiều Thanh –
Shop phục vụ tốt
Bùi Hoàng Nhật Mai –
Hàng chính hãng giá lại rẻ