Meraki MR76-HW 2×2:2 MU-MIMO 802.11ax

  • IP67-rated: tested for dust, shock, vibration, and moisture
  • Four radios: 2.4 GHz, 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Energy
  • 2-stream UL/DL MU-MIMO
  • 802.11ax up to 1.7 Gbps dual aggregate frame rate
  • One Gigabit Ethernet port, 802.3af PoE compatible

Giá bán: Liên hệ báo giá

Tư vấn đặt hàng Để lại thông tin tư vấn

Meraki MR76-HW 2×2:2 MU-MIMO 802.11ax

  • IP67-rated: tested for dust, shock, vibration, and moisture
  • Four radios: 2.4 GHz, 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Energy
  • 2-stream UL/DL MU-MIMO
  • 802.11ax up to 1.7 Gbps dual aggregate frame rate
  • One Gigabit Ethernet port, 802.3af PoE compatible

Meraki MR76-HW data sheet

Meraki MR76-HW specifications:

  1. Radios
    2.4 GHz 802.11b/g/n/ax client access radio
    5 GHz 802.11a/n/ac/ax client access radio
    2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
    2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
    Concurrent operation of all four radios
    Supported frequency bands (country-specific restrictions apply)
    Supported frequency bands (country-specific restrictions apply):
    2.412-2.484 GHz
    5.150-5.250 GHz (UNII-1)
    5.250-5.350 GHZ (UNII-2)
    5.470-5.600, 5.660-5.725 GHz (UNII-2e)
    5.725 -5.825 GHz (UNII-3)
  2. Antenna
    List of compatible antennas: MA-ANT-20/21/23/25/27
    802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
    DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
    2 x 2 multiple input, multiple output (MIMO) with two spatial streams
    SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
    Maximal ratio combining (MRC) & beamforming
    20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
    Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
    Packet aggregation
  3. Power
    Power over Ethernet: 802.3af protocol compatible
    Power consumption: 15W max (802.3af)
    Power over Ethernet injector sold separately
    Note: Actual power consumption may vary depending on the AP usage.
  4. Interfaces
    1x 10/100/1000 BASE-T Ethernet (RJ45)
  5. Mounting
    All standard mounting hardware included
    Mounts to walls and vertical poles.
  6. Physical Security
    Two security screws
    Concealed mount plate with anti-tamper cable bay
  7. Environment
    Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C)
    Operating and storage humidity: 5 to 95% non-condensing
    Operating and storage altitude: Up to 40,000 feet (12,192 meters)
    IP67 Environmental rating
  8. Reliability
    Mean Time Between Failure (MTBF): 1,315,612hrs at +25°C operating temperature
  9. Physical Dimensions
    11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts and antennas
    Weight: 1.34 kg
  10. Security

    Integrated Layer 7 firewall with mobile device policy management
    Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
    Flexible guest access with device isolation
    VLAN tagging (802.1q) and tunneling with IPsec VPN
    PCI compliance reporting
    WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)**
    EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
    TKIP and AES encryption
    Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
    Cisco ISE integration for Guest access and BYOD Posturing

  11. Quality of Service
    Advanced Power Save (U-APSD)
    WMM Access Categories with DSCP and 802.1p support
    Layer 7 application traffic identification and shaping
  12. Mobility
    PMK, OKC, & 802.11r for fast Layer 2 roaming
    Distributed or centralized layer 3 roaming
  13. Analytics
    Embedded location analytics reporting and device tracking
    Global L7 traffic analytics reporting per network, per device, & per application
  14. LED Indicators
    1 power/booting/firmware upgrade status
  15. Regulatory
    RoHS
    For additional country-specific regulatory information, please contact Meraki sales
  16. Warranty
    1 year hardware warranty with advanced replacement included
  17. Ordering Information
    MR76-HW: Meraki MR76 Cloud Managed 802.11ax AP
    MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
    MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
    MA-ANT-20 Meraki Dual-Band Omni Antennas
    MA-ANT-21 Meraki 5 GHz Sector Antenna
    MA-ANT-23 Meraki 2.4 GHz Sector Antenna
    MA-ANT-25 Meraki Dual-Band Patch Antenna
    MA-ANT-27 Meraki Dual-Band Sector Antenna

4 đánh giá cho Meraki MR76-HW 2×2:2 MU-MIMO 802.11ax

  1. Phoenix (xác minh chủ tài khoản)

    Very well worth the money.

  2. Aadarsh (xác minh chủ tài khoản)

    Very fast delivery.

  3. Nguyễn Thiên Đạt

    Cho xin giá sản phẩm

  4. Nguyễn Thị Nga

    Cho xin giá sản phẩm

Thêm đánh giá

SẢN PHẨM KHUYẾN MÃI