Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax

Meraki MR86-HW 4×4:4 MU-MIMO 802.11ax

• IP67-rated, tested for dust, shock, vibration, and moisture
• Four radios: 2.4 GHz and 5 GHz, dual-band WIDS/WIPS, and Bluetooth® Low Ene
• 4-stream UL/DL MU-MIMO 802.11ax, up to 3.55 Gbps dual-aggregate throughput
• One multigigabit Ethernet port, PoE: 802.3at

Meraki MR86-HW data sheet

Meraki MR76-HW specifications:

1. Radios
   2.4 GHz 802.11b/g/n/ax client access radio
   5 GHz 802.11a/n/ac/ax client access radio
   2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
   2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
   Concurrent operation of all four radios
   Supported frequency bands (country-specific restrictions apply):
   2.412-2.484 GHz
   5.150-5.250 GHz (UNII-1)
   5.250-5.350 GHZ (UNII-2)
   5.470-5.600, 5.660-5.725 GHz (UNII-2e)
   5.725 -5.825 GHz (UNII-3)
2. Antenna
   List of compatible antennas: MA-ANT-20/21/23/25/27 and AIR-ANT2513P4M-N=
   802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
   DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
   4 x 4 multiple input, multiple output (MIMO) with four spatial streams
   SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
   Maximal ratio combining (MRC) & beamforming
   20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
   Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
   Packet aggregation
3. Power
   Power over Ethernet: 42.5 – 57 V (802.3at compatible)
   Power consumption: 30W max (802.3at required)
   Power over Ethernet injector sold separately
   Note: Actual power consumption may vary depending on the AP usage.
4. Interfaces
   1x 100/1000/2.5G BASE-T Ethernet (RJ45)
5. Mounting
   All standard mounting hardware included
   Mounts to walls and vertical poles.
6. Physical Security
   Two security screws
   Concealed mount plate with anti-tamper cable bay
7. Environment
   Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C)
   Operating and storage humidity: 5 to 95% non-condensing
   Operating and storage altitude: Up to 40,000 feet (12,192 meters)
   IP67 Environmental rating
8. Reliability
   Mean Time Between Failure (MTBF): 1,566,656hrs at +25°C operating temperature
9. Physical Dimensions
   11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts or antennas
   Weight: 1.5 kg

10. Security

    Integrated Layer 7 firewall with mobile device policy management
    Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
    Flexible guest access with device isolation
    VLAN tagging (802.1q) and tunneling with IPsec VPN
    PCI compliance reporting
    WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)**
    EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
    TKIP and AES encryption
    Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
    Cisco ISE integration for Guest access and BYOD Posturing

11. Quality of Service
    Advanced Power Save (U-APSD)
    WMM Access Categories with DSCP and 802.1p support
    Layer 7 application traffic identification and shaping
12. Mobility
    PMK, OKC, & 802.11r for fast Layer 2 roaming
    Distributed or centralized layer 3 roaming
13. Analytics
    Embedded location analytics reporting and device tracking
    Global L7 traffic analytics reporting per network, per device, & per application
14. LED Indicators
    1 power/booting/firmware upgrade status
15. Regulatory
    RoHS
    For additional country-specific regulatory information, please contact Meraki sales
16. Warranty
    1 year hardware warranty with advanced replacement included
17. Ordering Information
    MR86-HW: Meraki MR86 Cloud Managed 802.11ax AP
    MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
    MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
    MA-ANT-20 Meraki Dual-Band Omni Antennas
    MA-ANT-25 Meraki Dual-Band Patch Antenna
    MA-ANT-27 Meraki Dual-Band Sector Antenna
    AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam
    Note: Meraki access point license required. For AIR-ANT2513P4M-N= antenna, contact Cisco directly