Meraki CW9164I-MR Cloud Managed 802.11ax Compatible AP

Meraki CW9164I-MR Cloud Managed 802.11ax Compatible AP

• Two 2:2 and four 4:4 MU-MIMO 802.11ax, up to 7.5 Gbps tri-radio aggregate frame rate
• 2.4 GHz, 5 GHz, and 6 Ghz radios; dual-band scanning radio; Bluetooth® Low Energy/IoT radio
• Full-time Wi-Fi location tracking
• PoE: 802.3at and .3bt compliant
• USB 2.0 connector

Meraki CW9164I-MR data sheet

Meraki CW9164I-MR specifications:

1. Radios
   2.4 GHz 802.11b/g/n/ax client access radio
   5 GHz 802.11a/n/ac/ax client access radio
   6 GHz 802.11ax client access radio
   2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
   2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios
   Supported frequency bands (country-specific restrictions apply):
   Tri-band mode:
   2.412-2.484 GHz ISM
   5.150-5.250 GHz (UNII-1)
   5.250-5.350 GHZ (UNII-2)
   5.470-5.600, 5.660-5.725 GHz (UNII-2e)
   5.725 -5.825 GHz (UNII-3)
   5.925 to 6.425 GHz (UNII-5)
   6.425 to 6.525 GHz (UNII-6)
   6.525 to 6.875 GHz (UNII-7)
   6.875 to 7.125 GHz (UNII-8)

2. Antenna

   Integrated omnidirectional antennas
   2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth
   5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
   5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
   6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
   802.11 ax compatible, 802.11ac Wave 2, and 802.11n Capabilities
   UL/DL-OFDMA
   Target Wait Time (TWT)
   BSS coloring*
   SU-MIMO and DL MU-MIMO support
   Maximal ratio combining (MRC)
   802.11ax beamforming
   20 and 40 MHz channels (802.11n)
   20, 40, 80 MHz channels (802.11ac Wave 2)
   20, 40, 80 and 160MHz channels (802.11ax)
   Up to 1024-QAM on 2.4 GHz, 5 GHz, and 6 GHz bands
   Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)

3. Power
   Power over Ethernet: 42.5 – 57 V (PoE+ and UPoE compliant)
   DC Power Adapter (54V)
   Power consumption: 30W to 50W (UPoE)
   Minimum power requirement: 30W (PoE+, USB is disabled)
   Power over Ethernet injector and DC adapter sold separately
4. Interfaces
   1x 100/1000/2.5G BASE-T Ethernet (RJ45)
   1x DC power connector (5.5 mm x 2.5 mm, center positive)
   USB 2.0 at 4.5W
   Console – Only available in DNA Persona
   Environmental Interfaces – Only available in DNA Persona
5. Mounting
   All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
   Desktop, ceiling, and wall mount capable
   Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
6. Physical security
   Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
   Kensington lock
7. Environment
   Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
   Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
   Operating temperature: 32° to 122°F (0° to 50°C)
   Operating humidity: 10% to 90% (non-condensing)
   Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)
8. Reliability
   Mean Time Between Failure (MTBF): 998,440 hrs at +25°C operating temperature
9. Physical Dimensions
   9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)
   Weight: 3.54 lb. (1.60 kg)

10. Security

    Integrated Layer 7 firewall with mobile device policy management
    Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
    Flexible guest access with device isolation
    VLAN tagging (802.1q) and tunneling with IPsec VPN
    PCI compliance reporting
    WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal*, WPA3 – Enterprise*, WPA3 – Enhanced Open (OWE)*
    EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
    TKIP and AES encryption
    Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
    Cisco ISE integration for Guest access and BYOD Posturing

11. Quality of Service
    Advanced Power Save (U-APSD)
    WMM Access Categories with DSCP and 802.1p support
    Layer 7 application traffic identification and shaping
12. Mobility
    PMK, OKC, & 802.11r for fast Layer 2 roaming
    Distributed or centralized layer 3 roaming
13. Analytics
    Embedded location analytics reporting and device tracking
    Global L7 traffic analytics reporting per network, per device, & application
14. LED Indicators
    One power/booting/firmware upgrade status
15. Regulatory
    RoHS
    For additional country-specific regulatory information, please contact Meraki sales
16. Warranty
    Lifetime hardware warranty with advanced replacement included
17. Ordering Information
    CW9164I-MR: Meraki CW9164I Cloud Managed 802.11ax Compatible AP
    MA-PWR-50WAC: Meraki AC Adapter for MR Series (power cable separate SKU)
    MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
    Cisco AIR-PWRINJ-6 802.3at
    Cisco AIR-PWRINJ-7 802.3bt
    Power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector
    Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
    Meraki access point license required