C9136I-A Cisco Catalyst 9136I Series, Internal Antennas, -A Regulato

  • C9136I-A Cisco Catalyst 9136I Series, Internal Antennas, -A Regulato
  • CON-SNT-C9136IAX SNTC-8X5XNBD Cisco Catalyst 9136I Series, Internal An
  • SW9136-CAPWAP-K9 Capwap software for Catalyst 9136I
  • AIR-AP-T-RAIL-R Ceiling Grid Clip for APs & Cellular Gateways-Recessed
  • AIR-AP-BRACKET-1 802.11 AP Low Profile Mounting Bracket (Default)
  • DNA-E-3Y-C9136 C9136I Cisco DNA On-Prem Essential,3Y Term,Trk Lic

Giá bán: Liên hệ báo giá

Tư vấn đặt hàng Để lại thông tin tư vấn

C9136I-A Cisco Catalyst 9136I Series, Internal Antennas, -A Regulato

Part Number Description
C9136I-A Cisco Catalyst 9136I Series, Internal Antennas, -A Regulato
CON-SNT-C9136IAX SNTC-8X5XNBD Cisco Catalyst 9136I Series, Internal An
SW9136-CAPWAP-K9 Capwap software for Catalyst 9136I
AIR-AP-T-RAIL-R Ceiling Grid Clip for APs & Cellular Gateways-Recessed
AIR-AP-BRACKET-1 802.11 AP Low Profile Mounting Bracket (Default)
CDNA-E-C9136 Wireless Cisco DNA  On-Prem Essentials, 9136 Tracking
DNA-E-3Y-C9136 C9136I Cisco DNA On-Prem Essential,3Y Term,Trk Lic
AIR-DNA-E Wireless Cisco DNA On-Prem Essential, Term Lic
AIR-DNA-E-3Y Wireless Cisco DNA On-Prem Essential, 3Y Term Lic
PI-LFAS-AP-T Prime AP Term Licenses
PI-LFAS-AP-T-3Y PI Dev Lic for Lifecycle & Assurance Term 3Y
AIR-DNA-E-T Wireless Cisco DNA On-Prem Essential, Term, Tracker Lic
AIR-DNA-E-T-3Y Wireless Cisco DNA On-Prem Essential, 3Y Term, Tracker Lic
AIR-DNA-NWSTACK-E AIR CISCO DNA Perpetual Network Stack
NETWORK-PNP-LIC Network Plug-n-Play Connect for zero-touch device deployment
C9136I-SINGLE SINGLE PACK OPTION
C9136I-OVER C9136I OVER OPTION

Product Datasheet

Product C9136I-A specifications:

Item Specification
Part numbers Cisco Catalyst 9136I Access Point: Indoor environments, with internal antennas
●  C9136I-x: Cisco Catalyst 9136 Series
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.
Cisco Wireless LAN Services
●  For details on optional WLAN Services, visit Services for Wireless and Mobility
Software Catalyst 9136I
●  Cisco IOS ® XE Software Release 17.7.1 or later
Supported wireless LAN controllers ●  Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
802.11n version 2.0 (and related) capabilities ●  4×4 MIMO with four spatial streams
●  Maximal Ratio Combining (MRC)
●  802.11n and 802.11a/g
●  20- and 40-MHz channels
●  PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz)
●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
●  802.11 Dynamic Frequency Selection (DFS)
●  Cyclic Shift Diversity (CSD) support
802.11ac ●  8×8 downlink MU-MIMO with eight spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80-, and 160-MHz channels
●  PHY data rates up to 3.4 Gbps (8×8 80 MHz or dual 4×4 80+80 MHz on 5-GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  Cyclic Shift Diversity (CSD) support
●  Wi-Fi Protected Access (WPA) 3 support
802.11ax ●  8×8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz)
●  4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz)
●  Uplink/downlink OFDMA
●  TWT
●  BSS coloring
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80-, and 160-MHz channels (6-GHz)
●  20-, 40-, 80-, 80+80-MHz (5-GHz)
●  20-MHz channels (2.4-GHz)
●  PHY data rates up to 10.2 Gbps (4×4 160 MHz on 6 GHz, 8×8 80 MHz on 5-GHz, and 4×4 20 MHz on 2.4-GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  WPA3 support
Integrated antenna ●  2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
●  6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces ●  2x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
●  Management console port (RJ-45)
●  USB 2.0 at 9W
Indicators ●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions ●  Access point (without mounting brackets):
(W x L x H) ◦      9.9 x 9.9 x 2.2 in. (25.1 x 25.1 x 5.6 cm)
Weight Catalyst 9136I
●  3.6 lb. (1.65 kg)
Input power requirements ●  802.3bt Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+)
●  Cisco power injector, AIR-PWRINJ7=
●  802.3af PoE (only for configuration staging, all radios off)
Catalyst 9136I
PoE power consumption 2.4-GHz radio 5-GHz radio 6-GHz radio Link speed USB Link Layer Discovery Protocol (LLDP)
802.3bt (UPOE) 4×4 8×8 4×4 2x 5G Y (9W) 47.3W
802.3at (PoE+) 2×2 2×2 4×4 1x 2.5G N 24.4W
802.3af (PoE) – – – 1x 1G N 13.95W
Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues.
Environmental Catalyst 9136I
●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
●  Operating temperature: 32° to 122°F (0° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)
Note: When the ambient operating temperature exceeds 40°C (104°F), the access point will shift from 8×8 to 4×4 on the 5-GHz radio, and uplink Ethernet will downgrade to a single 1G; however, the USB interface will remain enabled.
System memory ●  2048 MB DRAM
●  1024 MB flash
Warranty Limited lifetime hardware warranty
Available transmit power settings 2.4 GHz 5 GHz 6 GHz
●  23 dBm (200 mW) ●  26 dBm (400 mW) ●  23 dBm (200 mW)
●  -4 dBm (0.39 mW) ●  -1 dBm (0.79 mW) ●  -4 dBm (0.39 mW)
Note: In countries where use of the 6 GHz band is not allowed or there is no current software support, the 6 GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.
Regulatory domains Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
Compliance standards ●  Safety: ●  Radio:
◦      IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦      EN 300 328 (v2.2.2)
◦      EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) ◦      EN 301 893 (v2.1.1)
◦      UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex) ◦      EN 303 687 (v0.0.14, draft)
◦      CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) ◦      AS/NZS 4268 (rev. 2017)
◦      AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) ◦      47 CFR FCC Part 15C, 15.247, 15.407
◦      UL 2043 ◦      RSP-100
◦      Class III equipment ◦      RSS-GEN
●  Emissions: ◦      RSS-247
◦      CISPR 32 (rev. 2015) +AMD1:2019 ◦      LP0002 (109)
◦      EN 55032:2015/A11:2020 ◦      Japan Std. 66, and Std. 71
◦      EN IEC 61000-3-2:2019/A1:2021 ●  RF safety:
◦      EN61000-3-3:2013+A1:2019 ◦      EN 50385:2017
◦      AS/NZS CISPR32: 2015+AMD1:2020 ◦      AS/NZS 2772 (rev. 2016)
◦      47 CFR FCC Part 15B ◦      47 CFR Part 2.1091
◦      ICES-003 (Issue 7, Class B) ◦      RSS-102
◦      VCCI-CISPR 32:2016 ●  IEEE standards:
◦      CNS 13438:2006 (95) ◦      IEEE 802.3
◦      KS C 9832:2019 ◦      IEEE 802.3ab
◦      QCVN 118:2018/BTTTT ◦      IEEE 802.3af/at
●  Immunity: ◦      IEEE 802.11a/b/g/n/ac/ax
◦      EN 55035: 2017+A11:2020 ◦      IEEE 802.11h, 802.11d
◦      KS C 9835:2019 ●  Security:
●  Emissions and immunity: ◦      802.11i, (WPA2, WPA3)
◦      EN 301 489-1 V2.2.3 (2019-11) ◦      802.1X
◦      EN 301 489-17 V3.2.4 (2020-09) ◦      Advanced Encryption Standard (AES)
◦      QCVN (18:2014) ●  Extensible Authentication Protocol (EAP) types:
◦      QCVN 112:2017/BTTTT ◦      EAP-Transport Layer Security (TLS)
◦      KS X 3124:2020 ◦      EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
◦      KS X 3126:2020 ◦      Protected EAP (PEAP) v0 or EAP-MSCHAP v2
◦      EN 61000-6-1: 2019 ◦      EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦      PEAP v1 or EAP-Generic Token Card (GTC)
◦      EAP-Subscriber Identity Module (SIM)
Certifications ●  Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
●  Bluetooth SIG: Bluetooth Low Energy

 

8 đánh giá cho C9136I-A Cisco Catalyst 9136I Series, Internal Antennas, -A Regulato

  1. Lucas (xác minh chủ tài khoản) –

    The product is firmly packed.

  2. dũngkv –

    sản phẩm này xài tốt . cho xin giá

  3. Michael (xác minh chủ tài khoản) –

    Good quality.

  4. Nguyễn Hoàng Danh –

    Hàng chuẩn

  5. Nguyễn Thuý Hương –

    Hàng chuẩn

  6. Trần Tú Linh –

    Sản phẩm tốt

  7. Abbey –

  8. Dorris –

    References:

    Real money online poker https://margietbfm041694.thelateblog.com

Thêm đánh giá

SẢN PHẨM KHUYẾN MÃI