C9136I-E Cisco Catalyst 9136I Series, Internal Antennas,-E Regulator
Part Number | Description |
C9136I-E | Cisco Catalyst 9136I Series, Internal Antennas,-E Regulator |
CON-SNT-C9136IEX | SNTC-8X5XNBD Cisco Catalyst 9136I Series, Internal A |
SW9136-CAPWAP-K9 | Capwap software for Catalyst 9136I |
AIR-AP-T-RAIL-R | Ceiling Grid Clip for APs & Cellular Gateways-Recessed |
AIR-AP-BRACKET-1 | 802.11 AP Low Profile Mounting Bracket (Default) |
CDNA-E-C9136 | Wireless Cisco DNA On-Prem Essentials, 9136 Tracking |
DNA-E-3Y-C9136 | C9136I Cisco DNA On-Prem Essential,3Y Term,Trk Lic |
AIR-DNA-E | Wireless Cisco DNA On-Prem Essential, Term Lic |
AIR-DNA-E-3Y | Wireless Cisco DNA On-Prem Essential, 3Y Term Lic |
PI-LFAS-AP-T | Prime AP Term Licenses |
PI-LFAS-AP-T-3Y | PI Dev Lic for Lifecycle & Assurance Term 3Y |
AIR-DNA-E-T | Wireless Cisco DNA On-Prem Essential, Term, Tracker Lic |
AIR-DNA-E-T-3Y | Wireless Cisco DNA On-Prem Essential, 3Y Term, Tracker Lic |
AIR-DNA-NWSTACK-E | AIR CISCO DNA Perpetual Network Stack |
NETWORK-PNP-LIC | Network Plug-n-Play Connect for zero-touch device deployment |
C9136I-SINGLE | SINGLE PACK OPTION |
C9136I-OVER | C9136I OVER OPTION |
Product C9136I-E specifications:
Item | Specification | |||||||
Part numbers | Cisco Catalyst 9136I Access Point: Indoor environments, with internal antennas | |||||||
● C9136I-x: Cisco Catalyst 9136 Series | ||||||||
Regulatory domains: (x = regulatory domain) | ||||||||
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. | ||||||||
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. | ||||||||
Cisco Wireless LAN Services | ||||||||
● For details on optional WLAN Services, visit Services for Wireless and Mobility | ||||||||
Software | Catalyst 9136I | |||||||
● Cisco IOS ® XE Software Release 17.7.1 or later | ||||||||
Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) | |||||||
802.11n version 2.0 (and related) capabilities | ● 4×4 MIMO with four spatial streams | |||||||
● Maximal Ratio Combining (MRC) | ||||||||
● 802.11n and 802.11a/g | ||||||||
● 20- and 40-MHz channels | ||||||||
● PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz) | ||||||||
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||||||||
● 802.11 Dynamic Frequency Selection (DFS) | ||||||||
● Cyclic Shift Diversity (CSD) support | ||||||||
802.11ac | ● 8×8 downlink MU-MIMO with eight spatial streams | |||||||
● MRC | ||||||||
● 802.11ac beamforming | ||||||||
● 20-, 40-, 80-, and 160-MHz channels | ||||||||
● PHY data rates up to 3.4 Gbps (8×8 80 MHz or dual 4×4 80+80 MHz on 5-GHz) | ||||||||
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||
● 802.11 DFS | ||||||||
● Cyclic Shift Diversity (CSD) support | ||||||||
● Wi-Fi Protected Access (WPA) 3 support | ||||||||
802.11ax | ● 8×8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz) | |||||||
● 4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz) | ||||||||
● Uplink/downlink OFDMA | ||||||||
● TWT | ||||||||
● BSS coloring | ||||||||
● MRC | ||||||||
● 802.11ax beamforming | ||||||||
● 20-, 40-, 80-, and 160-MHz channels (6-GHz) | ||||||||
● 20-, 40-, 80-, 80+80-MHz (5-GHz) | ||||||||
● 20-MHz channels (2.4-GHz) | ||||||||
● PHY data rates up to 10.2 Gbps (4×4 160 MHz on 6 GHz, 8×8 80 MHz on 5-GHz, and 4×4 20 MHz on 2.4-GHz) | ||||||||
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||||||||
● 802.11 DFS | ||||||||
● CSD support | ||||||||
● WPA3 support | ||||||||
Integrated antenna | ● 2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |||||||
● 5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth | ||||||||
● 6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth | ||||||||
Interfaces | ● 2x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) | |||||||
● Management console port (RJ-45) | ||||||||
● USB 2.0 at 9W | ||||||||
Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |||||||
Dimensions | ● Access point (without mounting brackets): | |||||||
(W x L x H) | ◦ 9.9 x 9.9 x 2.2 in. (25.1 x 25.1 x 5.6 cm) | |||||||
Weight | Catalyst 9136I | |||||||
● 3.6 lb. (1.65 kg) | ||||||||
Input power requirements | ● 802.3bt Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+) | |||||||
● Cisco power injector, AIR-PWRINJ7= | ||||||||
● 802.3af PoE (only for configuration staging, all radios off) | ||||||||
Catalyst 9136I | ||||||||
PoE power consumption | 2.4-GHz radio | 5-GHz radio | 6-GHz radio | Link speed | USB | Link Layer Discovery Protocol (LLDP) | ||
802.3bt (UPOE) | 4×4 | 8×8 | 4×4 | 2x 5G | Y (9W) | 47.3W | ||
802.3at (PoE+) | 2×2 | 2×2 | 4×4 | 1x 2.5G | N | 24.4W | ||
802.3af (PoE) | – | – | – | 1x 1G | N | 13.95W | ||
Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues. | ||||||||
Environmental | Catalyst 9136I | |||||||
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||||||||
● Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m) | ||||||||
● Operating temperature: 32° to 122°F (0° to 50°C) | ||||||||
● Operating humidity: 10% to 90% (noncondensing) | ||||||||
● Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m) | ||||||||
Note: When the ambient operating temperature exceeds 40°C (104°F), the access point will shift from 8×8 to 4×4 on the 5-GHz radio, and uplink Ethernet will downgrade to a single 1G; however, the USB interface will remain enabled. | ||||||||
System memory | ● 2048 MB DRAM | |||||||
● 1024 MB flash | ||||||||
Warranty | Limited lifetime hardware warranty | |||||||
Available transmit power settings | 2.4 GHz | 5 GHz | 6 GHz | |||||
● 23 dBm (200 mW) | ● 26 dBm (400 mW) | ● 23 dBm (200 mW) | ||||||
● -4 dBm (0.39 mW) | ● -1 dBm (0.79 mW) | ● -4 dBm (0.39 mW) | ||||||
Note: In countries where use of the 6 GHz band is not allowed or there is no current software support, the 6 GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country. | ||||||||
Regulatory domains | Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. | |||||||
For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper. | ||||||||
Compliance standards | ● Safety: | ● Radio: | ||||||
◦ IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex) | ◦ EN 300 328 (v2.2.2) | |||||||
◦ EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex) | ◦ EN 301 893 (v2.1.1) | |||||||
◦ UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex) | ◦ EN 303 687 (v0.0.14, draft) | |||||||
◦ CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex) | ◦ AS/NZS 4268 (rev. 2017) | |||||||
◦ AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex) | ◦ 47 CFR FCC Part 15C, 15.247, 15.407 | |||||||
◦ UL 2043 | ◦ RSP-100 | |||||||
◦ Class III equipment | ◦ RSS-GEN | |||||||
● Emissions: | ◦ RSS-247 | |||||||
◦ CISPR 32 (rev. 2015) +AMD1:2019 | ◦ LP0002 (109) | |||||||
◦ EN 55032:2015/A11:2020 | ◦ Japan Std. 66, and Std. 71 | |||||||
◦ EN IEC 61000-3-2:2019/A1:2021 | ● RF safety: | |||||||
◦ EN61000-3-3:2013+A1:2019 | ◦ EN 50385:2017 | |||||||
◦ AS/NZS CISPR32: 2015+AMD1:2020 | ◦ AS/NZS 2772 (rev. 2016) | |||||||
◦ 47 CFR FCC Part 15B | ◦ 47 CFR Part 2.1091 | |||||||
◦ ICES-003 (Issue 7, Class B) | ◦ RSS-102 | |||||||
◦ VCCI-CISPR 32:2016 | ● IEEE standards: | |||||||
◦ CNS 13438:2006 (95) | ◦ IEEE 802.3 | |||||||
◦ KS C 9832:2019 | ◦ IEEE 802.3ab | |||||||
◦ QCVN 118:2018/BTTTT | ◦ IEEE 802.3af/at | |||||||
● Immunity: | ◦ IEEE 802.11a/b/g/n/ac/ax | |||||||
◦ EN 55035: 2017+A11:2020 | ◦ IEEE 802.11h, 802.11d | |||||||
◦ KS C 9835:2019 | ● Security: | |||||||
● Emissions and immunity: | ◦ 802.11i, (WPA2, WPA3) | |||||||
◦ EN 301 489-1 V2.2.3 (2019-11) | ◦ 802.1X | |||||||
◦ EN 301 489-17 V3.2.4 (2020-09) | ◦ Advanced Encryption Standard (AES) | |||||||
◦ QCVN (18:2014) | ● Extensible Authentication Protocol (EAP) types: | |||||||
◦ QCVN 112:2017/BTTTT | ◦ EAP-Transport Layer Security (TLS) | |||||||
◦ KS X 3124:2020 | ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2 | |||||||
◦ KS X 3126:2020 | ◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2 | |||||||
◦ EN 61000-6-1: 2019 | ◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST) | |||||||
◦ PEAP v1 or EAP-Generic Token Card (GTC) | ||||||||
◦ EAP-Subscriber Identity Module (SIM) | ||||||||
Certifications | ● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security | |||||||
● Bluetooth SIG: Bluetooth Low Energy |
Alan (xác minh chủ tài khoản) –
The product is firmly packed.
Zohar (xác minh chủ tài khoản) –
The product is firmly packed.
Nguyễn Tùng Kiên –
Shop phục vụ tốt
Đỗ Tùng Nhân –
Hàng chuẩn
Đặng Nguyễn Kiều Như –
Sản phẩm tốt
Nguyễn Minh Hồng –
Hàng chuẩn