Hotline: 0911658758
Cisco Meraki MT11 Cloud-managed probe sensor
Sensor Features
- Bare metal or glycol-encased temperature probe options available
- Temperature sensor range from -40°C – 55°C (-40°F – 131°F)
- Five days on-board storage
- Up to five years of battery life
- Flexible mounting options
Connectivity
- 2.4 GHz Bluetooth Low Energy
- Compatible with select MR and MV gateways
| Temperature probe sensors | Warranty |
| Bare Metal Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C | Three-year hardware warranty with advanced replacement |
| Glycol-Encased Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C | Ordering information |
| Wireless Capabilities | MT11-HW: Meraki MT11 Temperature Probe Sensor |
| Bluetooth low energy: Compatible with MV smart cameras and MR access points | MA-CBL-TEMP-ME-1: Bare Metal Temperature Probe |
| Operating frequency: 2.400–2.4835 GHz | MA-CBL-TEMP-GL-1: Glycol-Encased Temperature Probe |
| IEEE standard: 802.15.1 (Bluetooth 4.2 Low Energy BLE) | LIC-MT-XY: Meraki MT Enterprise License and Support (X = 1, 3, 5, 7 years) |
| Data Logging | MA-PWR-USB-XX: External Power Adapter (XX= US, EU, UK, or AU) |
| Data sampling: Sample polling every two minutes; data reporting to gateway every 20 minutes, or immediately upon threshold violation | In the Box |
| Onboard data storage: 4,000 data points (5 days of data at the default sampling rate) | MT11-HW |
| Bluetooth Low Energy (BLE) messages encrypted and authenticated using Cisco Trust Anchor technology | Quick-start and installation guide |
| Power | 2x AA batteries |
| Two AA batteries or power adapter | Mounting equipment: |
| Battery life up to five (5) years | Wall mount backplate |
| Power ratings: 5V; 0.1A | Magnet |
| MT11 Operating environment | VHB tape |
| 2x drywall anchors | |
| Temperature: -18°C to +55°C (0°F to +131°F) | 2x mounting screws |
| Relative humidity: 0-95% | 8x cable clips (included with sensor probe) |
| Physical Characteristics | Mounting gasket (included with sensor probe) |
| Dimensions 117.1mm X 65.9mm x 26.0mm (length x width x height) | Note: Each Meraki MT sensor requires a license to operate. MA-CBL-TEMP-ME-1 and MA-CBL-TEMP-GL-1 are sold separately but at least one is required for operation. |
| Battery compartment | |
| Multicolor, multifunction status LED | |
| General purpose button | |
| Reset button | |
| USB-C Port | |
| Sensor detection plug (receptacle connector) |
dũngkv –
sản phẩm này tốt nè, cho xin giá
dũngkv –
sản phẩm này xài tốt nè. cho xin giá
Phoenix (xác minh chủ tài khoản) –
Good quality.
Jackson (xác minh chủ tài khoản) –
Very well worth the money.
Hồ Đình Chiến –
Hàng chính hãng giá lại rẻ
Trần Huỳnh Thuỷ Phi –
Hàng chuẩn