Hotline: 0911658758
Huawei eKitEngine S380-S8P2T
Huawei eKitEngine S380 series Multi-Service Gateway (S380 for short) are designed for the SOHO market
Specifications:
| First supported version | V600R022C10 |
| Integrated fixed device | Y |
| Dimensions without packaging (H x W x D) | Basic dimensions (excluding the parts protruding from the body): 35.0 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 35.0 mm x 210.0 mm x 136.3 mm (1.38 in. x 8.27 in. x 5.37 in.) |
| Dimensions with packaging (H x W x D) | 150.0 mm x 275.0 mm x 200.0 mm (5.91 in. x 10.83 in. x 7.87 in.) |
| Chassis height | 0.8 |
| Installation type | Desk mounting,Wall mounting |
| Weight without packaging | 1.5 (3.31) |
| Weight with packaging | 1.8 (3.97) |
| Typical power consumption | 12.4 |
| Typical heat dissipation | 42.3 |
| Maximum power consumption | 145.8 W (PoE: 124 W) |
| Maximum heat dissipation | 497.5 |
| Static power consumption | 7.53 |
| 100% power consumption | 12.52 |
| MTBF | 65.36 |
| MTTR | 2 |
| Availability | >0.99999 |
| Noise at normal temperature (acoustic power) | Noise-free (no fans), < 30 |
| Noise at high temperature (acoustic power) | Noise-free (no fans), < 30 |
| Noise at normal temperature (acoustic pressure) | Noise-free (no fans), < 20 |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 0 |
| Maximum number of physical ports on the entire device | 10 |
| Maximum number of 100GE ports | 0 |
| Maximum number of 40GE ports | 0 |
| Maximum number of 25GE ports | 0 |
| Maximum number of 10GE ports | 0 |
| Maximum number of 5GE ports | 0 |
| Maximum number of 2.5GE ports | 0 |
| Maximum number of GE ports | 10 |
| Maximum number of FE ports | 10 |
| Dedicated stack port | Not supported |
| Redundant power supply | Not supported |
| Long-term operating temperature | 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.) |
| Restriction on the operating temperature variation rate | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity | 5% RH to 95% RH (non-condensing) |
| Long-term operating altitude | 0–5000 m (0–16404 ft.) |
| Storage altitude | 0-5000 m (0-16404 ft.) |
| Power supply mode | Power adapter |
| Rated input voltage | Power adapter input: 100–240 V AC; 50/60 Hz Power adapter output: 56 V DC |
| Input voltage range | Power adapter input: 90–290 V AC; 47–63 Hz |
| Maximum input current | 2.68 A |
| CPU | Quad-core, 800 MHz |
| Memory | DDR4: 512 MB |
| Flash memory | NAND Flash: 512 MB |
| Storage | – |
| Console port | Not supported |
| Eth Management port | LAN port |
| USB | Not supported |
| Hardware real-time power detection | Not supported |
| Dying gasp | Not supported |
| RTC | Not supported |
| RPS input | Not supported |
| Complete device sleeping | Not supported |
| Service port surge protection | Common mode: ±4 kV |
| Power supply surge protection | Power adapter: ±6 kV in differential mode and ±6 kV in common mode |
| Ingress protection level (dustproof/waterproof) | IP20 |
| Types of fans | None |
| Heat dissipation mode | Natural heat dissipation |
| Airflow direction | – |
| PoE | Supported |
| Maximum PoE power consumption | 124 W |
| PoE+ power interfaces | 8 |
| PoE++ power interfaces | – |
| Full load PoE power consumption 15.4W (802.3af) | 8 |
| Full load PoE power consumption 30W (802.3at) | 4 |
| Full load PoE++ power consumption 60W (802.3bt) | – |
| Full load PoE++ power consumption 90W (802.3bt) | – |
| Certification | EMC certification Safety certification Manufacturing certification |
https://Yv6bg.mssg.me/ –
I tend not to write a lot of remarks, but i did a few searching andd wouind up here
Huawei eKitEngine S380-S8P2T – >VNC. And I do have 2 questions for you if you don’t mind.
Could it be jut me or does it give the impression like a
few of these remarks appezr as if they are coming from brain dead individuals?
😛 And, if you are posting on additional online sites, I’d
like to follow everytuing frssh you have to post.
Would you make a list of the complete urls of all your shared pages like
your Facebook page, twitter feed, or linkedin profile? https://Yv6bg.mssg.me/
https://jobsleed.com/companies/tonybet/ –
With havijn so much content do you ever run into any problems of plagorism or copyright infringement?
My blog has a lot of unique content I’ve eitgher written myself or outsourced
but it looks like a lot of it is popping it up all over
the wweb witout my authorization. Do you know any ways tto help
prevent content ffrom being ripped off? I’d certainly appreciate it. https://jobsleed.com/companies/tonybet/