Hotline: 0911658758
HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch (R8J41A)
- I/O ports and slots:
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T)
Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)
2 SFP+ fixed 1000/10000 SFP+ ports
2X1/2.5/5/10G BASE-T ports - Additional ports and slots: 1 RJ-45 serial console port
Configuration Information:
| HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch (R8J41A) | ||
| I/O ports and slots | 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T (full only) | |
| 2 SFP+ fixed 1000/10000 SFP+ ports | ||
| 2X1/2.5/5/10G BASE-T ports | ||
| Additional ports and slots | 1 RJ-45 serial console port | |
| Physical characteristics | Dimensions | 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height) |
| Weight | 5.51 lb (2.5 kg) | |
| Memory and processor | 512 MB SDRAM, 256 MB flash | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) | |
| Performance | IPv6 Ready Certified | |
| 1000 Mb Latency | < 5 µs | |
| 10 Gbps Latency | < 3 µs | |
| Throughput | 95 Mpps | |
| Routing/Switching capacity | 128 Gbps | |
| Routing table size | 1024 entries | |
| MAC address table size | 16384 entries | |
| Environment | Operating temperature | 23°F to 122°F (-5°C to 50°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Non-operating/Storage relative humidity | 5% to 95%, noncondensing | |
| Acoustic | Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779 | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Maximum heat dissipation | 49.5/112.6 BTU/hr (52.2/118.8 kJ/hr) | |
| Voltage | 100 – 240 VAC | |
| Current | 10 A | |
| Maximum power rating | 33 W | |
| Idle power | 14.5 W | |
| Notes: | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. |
|
| Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance |
|
| Emissions | FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 |
|
| Immunity | Generic | EN 55024 |
| ESD | EN300 386 | |
| Management | IMC – Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager. | |
| Services | Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
|
Datasheet HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch (R8J41A)
Bryan (xác minh chủ tài khoản) –
Very well worth the money.
Ryker (xác minh chủ tài khoản) –
The product is firmly packed.
Nguyễn Lê Tài Dân –
Sản phẩm tốt
Trần Trung Đức –
Sản phẩm tốt